WANT TO JOIN THE SHORT WING PIPER CLUB?


Results 1 to 5 of 5

Thread: parking brake

  1. #1
    Join Date
    Nov 2017
    Location
    Denver
    Posts
    6

    Smile parking brake

    So I have the valve apart, there were no o rings. So
    the ? Is I have a nylon seat in the bottom of the
    brass insert were the ball and spring go, and I have new o rings from univair so am I just installing
    them on the plunger shaft? Or does the little o ring
    go were the nylon seat is, I've read all the posts and have searched the Web for an actual diagram is my picture correct? Sorry for the dumb question Thanks Greg
    Attached Thumbnails Attached Thumbnails 1511303996158-755747634.jpg  

  2. #2
    Join Date
    Oct 2005
    Location
    Graham, Texas
    Posts
    862

  3. #3
    Join Date
    Nov 2017
    Location
    Denver
    Posts
    6

    Default

    Steve, I have 1 small o ring that is the size of the small end if the shaft I have been unable to find were this is going any help would be great
    Thanks Greg

  4. #4
    Join Date
    Oct 2005
    Location
    Graham, Texas
    Posts
    862

    Default

    I take it you are talking about item 5 in the breakdown in the link I posted? If you look at post 22 in that same thread Glen has a good description of getting it in the groove.

  5. #5
    Join Date
    Nov 2006
    Location
    Mason, Ohio
    Posts
    302

    Default

    Greg,

    You may not need it anymore, but there is a drawing on the clubs Maintenance Data Depot, Miscellaneous Data section that shows the cross section of the valve and the various O-rings that can be used. A dental pick works will for removing and installing the O-rings.

    Tom Anderson

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

 

Home | Officers | Chapters | Members | Classifieds | Conventions